The BRT40ST gas-burning, B-vent fireplace offers a see through configuration that serves as a primary focal point for two rooms.
The BRT40ST radiant see-through B-Vent features a powder coat finish, deluxe split oak log set with burner and a painted black interior. Variable flame control, embers, flexible gas connector, volcanic stone, and tempered glass are also included. All units are equipped with a standard barrier that meets 2015 requirements.
Optional Propane Gas Conversion Kit
Listed to ANSI Z21.50 Decorative Gas Fireplace
Available in 40” clean-faced see through models only
Top flue configuration
Pre-wired for wall switch
Detailed ceramic fiber “aged oak” log set with 1/2" heavy-duty grate
Black painted interior (optional ceramic fiber liner available)
Durable textured powder coat finish
Optional remote control available for all models
Uses 6" B-Vent Pipe
20 Year Limited Warranty
The BRT40ST gas-burning, B-vent fireplace offers a see through configuration that serves as a primary focal point for two rooms. With an exceptional glass viewing area on two sides and the intense flame presentation of a powerful pan burner, the BRT40ST creates a beautiful, natural-looking fire that enhances the comfort and elegance of multiple rooms.
This appliance may be installed in an aftermarket permanently located, manufactured home (USA only) or mobile home, where not prohibited by local codes. This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.
These appliances comply with National Safety Standards and are tested and listed by PFS (Report No. F14-172) to ANSI Z21.50 (in Canada, CSA-2.22), and CAN/CGA-2.17-M91 in both USA and Canada, as vented gas fireplaces.
In Canada - CAN/CGA-2.17-M91 (R2009) (high altitude): THE CONVERSION SHALL BE CARRIED OUT BY A MANUFACTURER’S AUTHORIZED REPRESENTATIVE, IN ACCORDANCE WITH THE REQUIREMENTS OF THE MANUFACTURER, PROVINCIAL OR TERRITORIAL AUTHORITIES HAVING JURISDICTION AND IN ACCORDANCE WITH THE REQUIREMENTS OF THE CAN/CGA-B149.1 OR CAN/CGA-B149.2 INSTALLATION CODES.