3" Diameter PelletVent Kit For Pellet Burning Stoves By Dura-Vent
This item DOES NOT qualify for free shipping unless purchased with a fireplace. If ordered separately, additional shipping charges will apply.
Catalog Number: 36224
The product you have requested has been removed from our system and is no longer available for purchase.
Please contact our sales department for alternate items.
- Square Horizontal Cap
- 90° Elbow
- Wall Strap
- 12" Straight Length Pipe (5 pcs)
- Tee with CLean-Out Tee Cap
- Wall Thimble
- Appliance Adapter
PelletVent has set the standard in design, performance, and ease of installation for today's modern pellet stoves.
Since the introduction of pellet stoves in 1984, Simpson Dura-Vent has been recognized as the industry leader in venting systems for pellet stoves.
Today, approximately 3 out of every 4 pellet stoves in the US and Canada are vented with a Simpson Dura-Vent PelletVent system.
The PelletVent System features a double-wall, air-insulated design to ensure superior performance and safety.
A stainless steel inner flue, combined with a galvalume steel outer-wall provides maximum heat and corrosion resistance for safe, long lasting performance.
A 1/4" air space between the inner and outer-walls provides for static air insulation to ensure safe outer-wall temperatures, while provididng a minium clearance to nearby combustibles.
To prevent fly ash leakage, each pipe joint contains a factory installed high temperature ceramic rope gasket.
In addition, all elbows, tees, and fittings are factory sealed with high temperature silicone.
Ease of Installation
PelletVent features precision twist-lock connections for safe, easy assembly.
A complete product offering is available in galvalume or black painted finish, including pipe lengths from 6 to 60 inches, adjustable pipe lengths, 45° and 90° elbows.
Single and double-wall tees with clean-out adapters permit easy access for periodic maintenance.
When installing pellet stove inserts into a masonry fireplace, PelletVent offers 4-ply stainless steel flex with twist-lock fittings for easy through-the-damper installations.
The Finishing Touch
* Please Note: For use with horizontal installations.
PelletVent features a complete product offering, including wall thimbles for horizontal through-the-wall installations, and support boxes for both flat and cathedral ceiling installations.
For the finishing touch, decorative wall thimble and ceiling support covers are available; with optional designer series brass trim accents.
PelletVent's complete product line is designed to make every installation a success.